Option A2: Mounting to a wall with a baseboard
4
**Note: IMPORTANT!! When fastening the Mounted Level Poles to your wall make sure
that you are fastening the screws into a stud in the wall, OR that you use the appropriate
wall anchors.
Consult a profesional if you are unsure about safely mounting your Mounted Level Poles.
Step 1.
Begin by taking one of the Plastic Wall Spacers and placing it against the wall just
above the basebaord where you want the gate to be positioned.
Then, place the Mounted Level Pole within the
groove of the Plastic Wall Spacer, making sure
the bottom of the Mounted Level Pole is resting
on the floor.
Step 2.
Align the bottom pre-drilled screw hole in the Mounted Level Pole with the hole in the
Plastic Wall Spacer. Use one of the 2.5” Wall Mount Screws to fasten the Mounted Level
Pole and the Plastic Wall Spacer to the wall. If you are fastening your Mounted Level
Pole to drywall or similar material, ensure you are making contact with a supporting
stud behind the drywall. Do not fully tighten the Wall Mount Screw yet.
Step 3.
Slide a second Plastic Wall Spacer from the top the top of the Mounted Level Pole
downward until the middle pre-drilled screw hole aligns with the
hole in the second Plastic Wall Spacer. Using the built in bubble
level, ensure that the Mounted Level Pole is straight and level
before using a 2.5” Wall Mount Screw to fasten both components
to the wall.
Do not fully tighten the Wall Mount Screw Yet.
Plastic Wall spacer
Mounted Level Pole
