Regal 32 EXPRESS, Руководство пользователя

Страница: 174 / 364

9
Engine & Controls
It is important that you read the engine operator’s manual carefully
and become completely familiar with the operation as well as required
maintenance procedures on the engines and related propulsion
systems.
Before starting the engines check the guidelines below:
1.Open the engine hatch and sniff for fuel smells and
visually check for fuel leaks. If gasoline vapors are sensed
or leaks seen be sure to determine the cause and repair the
source before starting the engines. If you can not locate
a fuel leak contact a marine professional immediately or
your closest Regal dealer.
2. Remove any loose canvas and store in a dry location.
3. Shut and secure all hatches and doors.
4. Remove any debris from the engine water strainers
before turning on the seacock handle.
5. Ensure both engine seacocks are in the “open” position.
In the open position the handle is in line with the incoming
hose not perpendicular to it.
6. Make sure the swim ladder is secured in its folded posi-
tion and that the cover is in place.
7. Check fuel supply levels. Use the fuel “1/3” rule.
8. Turn all battery switches to the “on”position at the bat-
tery management panel.
9. Activate the VHF and listen for the latest weather
conditions.
10. Activate the plotter and radar checking their func-
tions.
11. Make sure all passengers are accounted for, seated and
their life jackets are properly fi tted.
12. Check for a balanced load.
13. Before disembarking make sure a person is aboard
who knows how to operate the vessel and is trained in
emergency procedures in case the captain would not be
able to carry out his duties.
14. Inspect the engine and drive oil levels. Add specifi ed
oil as required.
15. Check engine coolant levels. Add specifi ed coolant as
required.
AFTER STARTING ENGINES
1. Allow the engines to idle for a short period as they warm
up.
Never race a cold engine!
2.Check gauges for proper operation. Pay particular atten-
tion to volts, oil pressure and temperature display panel
functions as they are key indicators of a proper performing
engine. Also, check that no alarms are displayed and no
warning lights are fl ashing.
3. Open the engine compartment and listen to each engine
for unusual sounds.
4. Inspect the fuel, exhaust, and engine circulation system
for leaks.
5. Visually check the entire sump (bilge) for any unusual
conditions.
6. Visually check the through hull fi ttings located on the
outside hull for the proper water output from components
such as the air conditioner pump and generator.
BEFORE STARTING ENGINES