REFUSOL 20K-2T, Руководство по эксплуатации

Страница: 35 / 72

Installation 35
Mounting the Inverter Bracket
REFUsol 20K...33K-2T
982079 | 05 | 2021-03
En
gl
is
h
D
eu
ts
ch
Fig. 33: Minimum installation distance and arrangement of
several
REFUsol 20K...33K-2T
4.5 Mounting the Inverter Bracket
There are two options for mounting the inverter
bracket. Vertical wall mounting or wall mounting with
a maximum inclination angle of 15°.
✅ Requirements for the installation location accord -
ing to IEC 60364-7-712 for photovoltaic power sup -
ply systems are taken into account during planning.
1. Position the inverter bracket, align it with a spirit
level and mark the drill holes.
2. Drill holes according to the markings.
3. Insert heavy-duty anchors into the drilled holes and
hammer them in with a hammer.
4. Fasten the inverter bracket with the heavy-duty
anchors – or select equivalent fastening material.
5. Tighten all screws of the heavy-duty anchors cross -
wise
Fig. 34: Mounting the inverter bracket
4.6 Remove the Inverter from the Packaging
✅ Inverter packaging is ready at the installation site.
▷ With two people, grasp the inverter at the following
positions and lift it out of the packaging.
20 cm
100
cm
20 cm
30 cm