REFU REFUsol 100K, Руководство по эксплуатации

Страница: 31 / 66

Installation 31
Hooking in the PowerUnit
REFUsol 100K
982059/02
2020-11
En
gl
is
h
D
eu
ts
ch
Fig. 30: Unpacking the PowerUnit
4.17 Hooking in the PowerUnit
Ensure following conditions prior to hooking in the
PowerUnit:
✅ Ambient conditions are dry.
✅ Protective cover of the ConnectionBox is removed.
✅ Unpack the PowerUnit carefully and inspect contact
connections on the rear side for any damages.
1. Lift the PowerUnit with the help of 2 people with
one hand on the handle and one hand on top of the
inverter.
2. Carefully insert the PowerUnit into the device
holder of the ConnectionBox as seen in figure 31.
Fig. 31: Hooking PowerUnit onto ConnectionBox
3. One person should hold the PowerUnit in place
while the 2
nd
person should hook the hydraulic rod
into the slot in the ConnectionBox as seen in
figure 32.