10
counts down to "0" second to end the solidification.
4.4 During operation, the blue light can be stopped by press the power button "ON/OFF" at any time.
4.5 Low power detect circuit is fixed inside of the main unit, when low power is detected, the indicator of the
main unit will wink, please charge in time.
4.6 After the operation, please clean the fiber with calico in order not to affect the light intensity.
4.7 This equipment will turn off automatically if no any action within 2 minutes, turn it on by press "ON/OFF" button.
4.8 The depth of solidification of composite is no less than 4mm per 10 seconds.
4.9 The Curing Light is equipped with over-heat protection system. It can continuously work 200s, For
example, continuously operate the curing light for 10 times under 20s working mode, then it will come into
over-heat protection status. And only after 2 minutes sleep, it can restart working 200s continuously.
5 Cleaning, disinfecting and sterilizing
5.1 Please conform to the recommendations of the manual "Reprocessing Instructions of Cleaning,
Disinfecting And Sterilizing" delivered with your product regarding the procedure of cleaning, disinfecting,
sterilizing and packing of the components. Follow present-day regulations enforced in the country about
reprocessing. The use of scouring powder or an abrasive sponge will damage its surface.
5.2 The optical fiber can be sterilized. The light hood, LED lamp, battery and power adapter cannot be
sterilized.
Notice:
a) Clean in the handpiece (detachable) with compressed air before sterilization.
b) Be sure that the optical fiber has been unscrewed from the handpiece and it cannot be sterilized with
others.
