a. Press the M button until the T.I/O selection is flashing. Press OK button to select.
b. Use the up and down arrows to adjust the hours and minute of the first cycle.
c. Use the M button to move from 1st line of display to second and adjust second time
period with up and down buttons.
d. Press the OK button to confirm the time. (Flashing OFF will turn to ON).
( 3 ) Temperature scale set
This selection allows you to switch the machine from displaying temperature in degrees
Celsius to degrees Fahrenheit.
a. Press the menu key.The screen shows:Humid,Timer,Tempu, R.
H
u m
i
d
T
i
m e
r
T
e m p
U
R
This Ducting opintion is allowed you to give the special dry to the particular wet location
and make it fixed in repadly,Diameter for this ducting is 160mm,Layflat ducting can be used for
this choice.
d. Press the menu key to move the cursor to the ℃ on/offor ℉ off/on(flashes).
e. Press to confirm key. The on/off status of C and F will exchange.
T
e m p
U
R
S
e
t
t
i
n
n
g
O
O
f
f
o
F
℃
b.Press the Menu key unit TempU flashes. Press OK to select.
c. The screen shows:Celsius degree℃ on/off and Fahrenheit degree the ℉ off/on.
9.Optional Duct Installation
-9
-
-8
-
f
f
n
o
o
T
T
.
.
T
R
/
.
I
0
b.Press the Menu key unit TempU flashes. Press OK to select.
c. The screen shows:T.on,T.off,T.I/0,R
H u m i
d
T
i m e
r
T e m p U
R
“
“T.off” – Unit will stop when timer expires
“T.I/O” – Unit will cycle “on” and “off” based on the set time. If unit is off, the
cycling will start with unit “off”. If unit is on, the cycling will start with the unit “on.”
d. Press the menu key, move into cursor to function you prefe.
T.on” – Unit will start when timer expires
T
i m e
r
O n
O
R
f
f
0
0
0
0
1) Start Time (T.on Selection)
a.Press to confirm key.The screen runs as follow, the first 00 positions (flashes) at the same
time.
b.Press Up and Down key, the first position number from 00-24 variety, choose an hour
numberc. Press to confirm key to make selection the number.
d.After, the next number position automatically flashes(minute position). Once the
correct time is displayed, press to OK key to make selection the number.
e.The OFF button will now flash. Press OK one more time, the OFF will switch to ON and
the timer is now set.
a. Press the M button until the T.off button is flashing. Press OK to confirm.
b. Set timer as above.
2) Shut Off Time (T.offSelection). Unit will run for designated time and then turn off.
3) Cycling Timer (T.I/O Selection)
The third selection, T.I/O, lets you set up the machine to cycle on and off during a specific
time frame. For example, you could set the unit to run 8 hours a day and remain off the other
REFINE-DEHUMIDIFIERS
REFINE-DEHUMIDIFIERS
16 hours. Note: You are selecting on and off periods of time, not set clock times.