18
page
NOTE:
Please check, in particular when travel-
ling abroad, if the local power supply
voltage corresponds to the voltage
indicated on the devices or rather the
power adapters.
Technical data:
1. baby unit
Internal Power Supply:
3 rechargeable batteries 1.2V AAA / Nickel Metal Hydride
External Power Supply::
Max. 6V 200mA
Capacity:
Max. 10mW
Channel Frequency:
863.4 MHz ~ 863.8 MHz
Norm :
EN 301489 - 9, EN 301489 - 1, EN 301357 - 2
2. parent unit
Internal Power Supply:
3 rechargeable batteries 1.2V AAA / Nickel Metal Hydride
External Power Supply:
Max. 6V 200mA
Channel Frequency:
863.4 MHz ~ 863.8 MHz
Norm :
EN 301489 - 9, EN 301489 - 1, EN 301357 - 2
3. plug
Input Voltage:
230V ~ 50Hz
Output voltage:
max. 6V 200mA
Polarity:
Phone Jack:
Norm :
LVD: EN 61558-2-6 , EN 61558-1
EMC: EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
Problem :
NOTE:
Should the baby (transmitter) or
parent unit (receiver) not be functio-
ning properly or should unexpected
malfunctioning occur, we kindly ask
you to :
1.) once again fi rst thoroughly read
the respective section of the instruc-
tion manual.
2.) Afterwards please try to fi nd the
error with the help of the following
malfunction chart.
3.) Should you not be able to solve the
problem, we kindly ask you to contact
your specialist dealer or to call our
hotline at
+49 (0)700 /73 374 624
8.00 am – 4.00 pm MON - FRI.
Problem / Situation
possible malfunction source
What can be done?
Distorted sounds or static or
RECEIVER unable to receive
signal (With LED-display ran-
ge exceedance and acoustic
warning).
• SENDER or RECEIVER
is turned off.
• Low battery (LED display
is fl ashing red).
• The RECEIVER is
beyond the SENDER
range (with LED-display
range exceedance
and acoustic warning).
• Wrong Channel
• Interference from other
household
appliances/ units like
cordless phones, computer,
cell phones etc.
• Different coding
of SENDER and RECEIVER
• Check if both units
are turned ON.
• Check if the batteries
have suffi cient capacity and
if they are inserted properly
(+ / -) or if connectors are
dirty/ rusty. If capacity is
insuffi cient, recharge
batteries with the adapter.
• Position the RECEIVER unit
closer to the SENDER unit.
• Check the channel selec
tion according to “Channel
A &B”.
• Asses the cause of
interference and reposition
the units.
• Check the coding of the
units.
English (
GB)
3004.indb 18
30.04.2008 17:46:25