Reely Pocket Drone FPV, Руководство по эксплуатации

Страница: 33 / 40

33
Touch the cog icon (figure 14, position 9) to display additional control icons.
Touch the "REV" icon (figure 15, position 20) to invert the video image by 180° (the image will turn upside down).
The "VR" icon (figure 15, position 21) activates a "quasi 3D mode". The live image from the camera is split into two
parts on your smartphone screen. This allows you to connect your smartphone to a VR headset (not included, must
be purchased separately) and use FPV mode in 3D (i.e. with spatial perception). Enable 3D mode in the app and
insert your smartphone into the VR headset (refer to instruction manual for details). Wear the VR headset and start
the quadcopter.
Select the icon in position 22, figure 15 to enable headless mode. Refer to the instructions in section 12 for more
information on how to use headless mode.
If the trim controls are not sufficient to prevent the quadcopter from drifting or responding abnormally, the
sensors must be recalibrated. Place the quadcopter on an even, level surface and touch the calibration
icon (figure 15, position 23). The LEDs in the outrigger arms will start to flash. The LEDs will stay constant
when calibration is complete.
d) Controlling the quadcopter with your smartphone's position sensors
Smartphones contain position sensors, which are used to detect the orientation of the device and rotate the display.
These sensors can also be used to control the quadcopter's "pitch" (forwards and backwards) and "roll" functions (left
and right).
To control the quadcopter with your smartphone's position sensors, follow the instructions in section 14. b) to prepare
the quadcopter for take-off, and then select the icon in position 7, figure 14 to activate position sensor control.
Keep your smartphone horizontally in your hands.
Touch the "Automatic take-off" (fig, 16, position 10) or "Automatic landing" (fig, 16, position 11) to make the quadcopter
take off or land.
Use the left-hand control icon (figure 16, position 12) to control the altitude and the rotation about the vertical axis.
The smartphone's position sensors are used to control the left/right and forwards/backwards movement (instead of the
right-hand control icon). Tilt your smartphone forwards to make the quadcopter move forwards. Tilt your smartphone
backwards to make the quadcopter stop or move backwards. Tilt your smartphone to the left to make the quadcopter
move to the left. The quadcopter will move in the same direction as your phone.