Reely Pocket Drone FPV, Руководство по эксплуатации

Страница: 16 / 40

16
11. Before first use
This manual uses the standard terms for controlling a quadcopter. These are used in aviation terminology
and are in widespread use.
Directions are given from the perspective of a "virtual" pilot. The direction is indicated by the red LEDs in
the chassis (these indicate "backwards").
a) Hovering the quadcopter
Hovering denotes a status in which the quadcopter neither rises nor falls. This means that the lifting force is equal to
the weight.
After starting the quadcopter with the "Automatic take-off/automatic landing" button (figure 4, position 5), slide the
left-land control pad (figure 4/5, position 4) forwards to increase the motor speed and make the quadcopter move
upwards. Pull the control pad backwards to make the quadcopter fall. When the control pad is in the neutral position,
the quadcopter uses the built-in sensors to maintain the current altitude.
Figure 5
The quadcopter may be affected by turbulence and air currents during take-off and when the quadcopter
is just above the ground. This may cause the quadcopter to respond more quickly to remote control com-
mands or move forwards, backwards or sideways. This so-called "ground effect" disappears at an altitude
of approximately 50 cm.
4