Reely HCP80, Руководство по эксплуатации

Страница: 96 / 240

96
14. The Function Setting Menu „Function“
The specific settings for the respective models are made in the function setup menu. The menu items available in the
function setup menu depends on which model type was selected in the system setup menu.
These instructions will only deal with the setting options that are relevant in connection with the helicopter
„HCP80“.
The designations of the different control functions in the helicopter programming are partially assumed from the plane
model settings and have the following functions:
AILE = rolling function, ELEV = nodding function, THRO = throttle function, RUDD = tail function
To get to the function setting menu, switch the transmitter on
with the on/off switch. If the operating display appears, push the
two buttons „UP“ and „DOWN“ at the same time.
When the function setting menu is displayed, release the two
buttons.
The first 4 menu items of the function setting menu are now
displayed; see figure on the right.
The following setting functions are available for you in the system setting menu:
Function
Display
Servo direction setting „1: REVERSE“
Servo end deflection setting „2: EPA“
Basic trim „3: SUB TRIM“
Dual rate/exponential setting „4: D/R“
Throttle switching „5: TH HOLD“
Gyro sensitivity setting „6: GYRO SEN“
Throttle curve setting „7: TH CURV“
Pitch curve setting „8: PIT CURV“
Swash plate servo settings „9: SWASH MIX“
Pitch/tail mixer „10: REVO MIX“
Mixer programming „11: MIX1“
Mixer programming „12: MIX2“
Timer „13: TIMER“
Servo control/test „14: MONITOR“
Figure 31