Reely HCP80, Руководство по эксплуатации

Страница: 91 / 240

91
d) Resetting Model Memory „MDL RST“
To remove any present and undesired settings before programming a new model, you can delete individual model
memories targetedly and thus rest them to factory settings.
However, only the currently called model memory can be reset to factory parameters.
To delete a model memory, proceed as follows:
• Call the system settings menu.
• Select the menu item „MDL RESET“ with the buttons „UP“ or
„DOWN“.
• Activate the menu item with the button „SELECT“.
The display shows the currently called model memory, the
modulation type and the model type and the model name.
The bottom line shows the safety prompt „DATA RESET?“.
• Pushing the button „CLEAR“ resets the displayed model me -
mory to factory settings. The display „DATA RESET“ is briefly
hidden and then reappears.
• Push the buttons „UP“ and „DOWN“ at the same time to re -
turn to the overview of the system setting menu.
• Select the target memory and check if deletion has been per -
formed correctly.
Figure 26