Reely GT2+1 EVO, Руководство по эксплуатации

Страница: 19 / 28

19
15. Checking the switching function
In addition to driving and steering functions, the GT 2+1 EVO remote control also offers the option of connecting and
controlling a third servo on the receiver.
If the operating button for channel 3 (also see Figure 2,
Pos. 14) is pressed on the remote control, the output lever
of the servo connected to the receiver output 3 runs from
one end position to the other end position (see Figure 14
below).
The function can be used, for example, to control a special
mechanical function in a model.
Important!
Because the two end positions cannot be set
electronically, any linkage rods must be ad-
justed so that the servo on channel 3 is not
mechanically limited in its rotational movement.
As an alternative to a servo, a switching module can also
be connected to receiver output 3. Thus it is possible, for
example, to turn the light functions on and off on the model
by remote control as well.
After you have checked or set the correct driving, steer-
ing and switching function, first switch off the receiver and
then the transmitter.
The model is now ready for the first test drive.
Figure 14