www.
reefe
.com.au
Ascento Group Australia
©
AI.062020
P: 1800 807 604
WARNING!
ELECTRICAL PRECAUTIONS
DO NOT INSTALL PUMP if the premises does not have a Safety Switch (RCD)
Before servicing a pump, always shut off the power supply and then make sure you are not standing in water and that there
is no risk of electrical shock. If pump is direct-wired to the electrical circuit, have a qualified licensed electrician disconnect it
before attempting any repairs or servicing.
DO NOT ATTEMPT ELECTRICAL REPAIRS OF ANY SORT UNLESS YOU ARE A LICENSED
ELECTRICIAN
WARRANTY RECORD - FILL IN AND RETAIN THIS WITH YOUR ORIGINAL PURCHASE RECEIPT
PURCHASER NAME & ADDRESS...................................................................................... PHONE NO...............................
DATE OF PURCHASE ………../.........../............ DEALER/STORE NAME..............…................................…............................
DEALER SUBURB/TOWN….....…...............…........................................................... PHONE NO…......................................
BRAND & MODEL NUMBER OF PUMP……...................................... BATCH or SERIAL NUMBER…………………………………..
Do NOT send this form to us, retain it for your record.
INSTALLATION CHECKLIST: MUST BE FILLED IN FOR WARRANTY TO APPLY
Installer Name__________________________Qualification:__________________________(write Owner if applicable)
Phone Number: ____________________If installed by a Plumber or Electrician, Licence No:_____________________
Installation Address:_____________________________________________________________________________
Tick the boxes as the item is completed/correct, put n/a if not applicable;
[
] The Pump is being used for an appropriate purpose for which it is intended, according to the instructions
[
] The Power Circuit the Pump is connected to is RCD (Safety Switch) Protected
[
] A Y-Strainer or Pre-filter is installed in the suction pipe to prevent particles entering the pump
[
] All swarf has been removed from the tank after cutting openings etc.
[
] Barrel Unions are fitted on the pipe connections for easy removal & replacement
[
] A Ball Valve or Gate Valve is fitted to the suction pipe (the pipe from tank to pump)
[
] Pipe is sized appropriately for the application (diameter and length)
[
] The installation is constructed so the pump can be easily removed or replaced.
[
] The pump is installed in accordance with National & Local Plumbing Regulations
[
] The Electrical Supply cable is plugged into a Power Outlet that is in accordance with the current standard
of Electrical Safety Regulations AS/NZS 3000 – or the pump has been wired directly to the power circuit by a
Licenced Electrician.
[
] The Pump has been primed (filled with water) started, tested, and operates correctly.
[
] The pipes and connections and the barrel-union on the pump, and toilet cisterns (if connected) have been checked
for leaks.
[
] The pump is protected from sunlight & rain, with a suitable vented pump-cover or enclosure.
[
] The Owner has been shown how to re-prime and re-set the pump (re-fill the pump with water if it runs dry)
Signed by the Installer:________________________________________ Date Installed: / /
VSRE - Parts Breakdown.indd 10
VSRE - Parts Breakdown.indd 10
25/06/2021 1:32:52 PM
25/06/2021 1:32:52 PM
