reedinstruments
www
com
9
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Frequency/Duty Cycle Measurements
1. Set the rotary function switch to the V position.
2. Press the Hz/% button to indicate “Hz” in the display.
3. Insert the black test lead into the negative COM terminal and the
red test lead into the positive V terminal.
4. Touch the test probe tips to the circuit under test. Read the
frequency value on the display.
5. Press the Hz/% button again to indicate “%” on the display.
6. Read the % of duty cycle on the display.
Temperature Measurements
1. To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
2. Set the function switch to the TEMP position.
3. Select °C or °F with the MODE button.
4. Insert the Temperature Probe into the negative COM and the
positive V terminals, making sure to observe the correct polarity.
5. Touch the Temperature Probe head to the area to be measured.
Keep the probe touching the part under test until the reading
stabilizes (about 30 seconds).
6. Read the temperature value on the display. To avoid electric
shock, be sure the thermocouple has been removed before
changing to another function.
www.
GlobalTestSupply
.com
Find Quality Products Online at: