reedinstruments
www
com
7
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Operating Instructions
AC/DC Current Measurements
1. Rotate the Function switch to the
500ADC, 50ADC, 500AAC or 50AAC
position.
2. If the range needed is not known,
select the higher range first then
move to the lower range if necessary.
3. Press the trigger to the open jaw and
fully enclose one conductor. The LCD
will display the reading.
AC/DC Voltage Measurements
1. Insert the black test lead into the negative COM terminal and the
red test lead into the positive V terminal.
2. Set the function switch to the V position, and select either AC
or DC with the MODE button.
3. Connect the test leads in parallel to the circuit under test.
The LCD will display the reading.
Resistance Measurements
1. Insert the black test lead into the negative COM terminal and the
red test lead into the positive V terminal.
2. Set the function switch to the Ω position.
3. Touch the test probe tips across the circuit or component under
test. It is best to disconnect one side of the device under test so
the rest of the circuit will not interfere with the reading.
4. The LCD will display the reading.
www.
GlobalTestSupply
.com
Find Quality Products Online at: