reedinstruments
www
com
11
Duty Cycle Measurement
All the measuring procedures are same as a frequency measurement
except press the Hz/% until the display shows %.
Zero Adjustment
Open the input terminal and the capacitor that is not connected and press
the relative button until the display shows a value of zero. Connect the
measuring capacitor again and take your measurement.
Data Hold Operation
Press the hold button and the displayed value will hold and
will
appear. Press the hold button again to release the data hold function.
Relative Operation
While taking a measurement the meter will store the last measured value.
Press the relative button once and LCD will show a value of zero
.
The newly inputted measured values will automatically be deducted from
the last measured values and those new values will appear on the display.
To release the relative measurement function press the relative button,
and the
marker will disappear.
Backight Operation
Push the backlight button for about two seconds for the LCD to illuminate.