9
Operating Instructions
Power ON/OFF
1. Turn the meter on by pressing the
POWER
button. To turn the meter
off, press and hold the
POWER
button for 2 seconds.
Note:
This meter can be powered by either 6 x "AA" batteries or an AC
adapter (sold separately).
Selecting Measurement Modes
The R6050SD offers 4 types of measurement modes:
• Humidity/Temperature
• Dew Point
• Wet Bulb
• Type K/J Thermometer
1. When the meter is on, press and hold the FUnCTiOn button to scroll
through the measurement modes as indicated by "rH" (for Humidity/
Temperature measurement), "dp" (for Dew Point measurement),"_Et"
(for Wet Bulb measurement) and "tP" (for Type K/J Thermometer
measurement.)
2. Release the FUnCTiOn button to confirm selection.
Humidity/Temperature Measurement Mode
1. While the meter is off, plug the Probe into the Probe Input Socket,
then power on the meter by pressing the
POWER
button.
2. Select the "rH" function (see
Selecting Measurement Modes
for details).
3. Hold the Probe Handle and face the Probe Head against the
measuring source. The top part of the display will indicate the
humidity value, and the lower part of the display will indicate the
temperature value as shown below.
%RH
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
