10
Dew Point Measurement Mode
1.
Select the "dP" function (see
Selecting Measurement Modes
for details).
2. Hold the Probe Handle and face the Probe Head against the
measuring source. The top part of the display will indicate the dew
point value, and the lower part of the display will indicate "dP" as
shown below.
Wet Bulb Measurement Mode
1. Select the "_Et" function (see
Selecting Measurement Modes
for details).
2.
Hold the Probe Handle and face the Probe Head against the measuring
source. The top part of the display will indicate the wet bulb value, and
the lower part of the display will indicate "_Et" as shown below.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
