11
Type K/J Thermocouple Measurement Mode
1.
Select the "tP" function (see
Selecting Measurement Modes
for details).
2. Plug the optional Type K or J Thermocouple Probe into the Type K/J
thermocouple input jack.
3. The screen will display a "K", confirming that is configured by default
to a Type K thermocouple probe. The measured temperature will now
be displayed on the display screen as shown below.
Note:
if using a type J thermocouple probe, see
Selecting Thermocouple
Type
for details.
K
Data Hold
1. While taking a measurement, press the
HOLD
button to freeze the
current measurement(s) on the display.
2. While in this mode a "HOLD" symbol will appear on the display.
3. Press the
HOLD
button again to resume normal operation.
Note:
When the Data Hold feature is active all buttons except the
POWER
button are disabled.
Recording Maximum and Minimum Readings
1. Press the
REC
button to enter recording mode as indicated by
"REC" on the LCD. The meter will now begin recording maximum
and minimum readings.
2. While in recording mode;
A) Press the
REC
button once and the maximum value will appear
on the display as indicated by "REC MAX".
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
