16
Automatic Data Logging Mode
In automatic mode the desired data logging sampling rate can be set
between 1 second to 8 hours, 59 minutes and 59 seconds prior to recording
(see
Setting the Data Logging Sampling Rate
section for details). In order to
setup the meter for automatic data logging, follow steps 1 through 5 below.
1. Press the
REC
button and "REC" will appear on the LCD.
2. Press the
LOG
button to enter automatic data logging function as
indicated by "DATALOGGER".
Note:
If a card is not inserted or the card is defective, the meter will display
"EMPTY DATALOGGER". in this case, power the meter OFF and try again
with another SD memory card or verify that the card is correctly inserted.
3. The "DATALOGGER" icon will appear on the LCD and will flash every
time a reading is stored.
4. To pause the data logging session, press the
LOG
button and
"DATALOGGER" will stop flashing. To resume, press the
LOG
button again.
5. To end the current data logging session, press and hold the
REC
button for 2 seconds.
Transferring Data from the SD Memory Card to a Computer
1. While the meter is powered Off, remove the SD memory card from
the SD card slot.
2. Insert the SD memory card into the computer.
3.
Open the file(s) with Excel. See sample below:
Position Date
Time
Ch1_Value
Ch1_Unit
Ch2_Value
Ch2_unit
1
19-07-10
0:01:02
0.419
mS
21.7
Degree_C
2
19-07-10
0:01:04
10
mS
25
Degree_C
3
19-07-10
0:01:10
0.5
mS
21.7
Degree_C
4
19-07-10
0:01:10
0.418
mS
21.7
Degree_C
5
19-07-10
0:01:12
0.419
mS
21.7
Degree_C
6
19-07-10
0:01:14
10
mS
25
Degree_C
7
19-07-10
0:01:16
0.419
mS
21.7
Degree_C
8
19-07-10
0:01:18
0.419
mS
21.7
Degree_C
9
19-07-10
0:01:20
10
mS
25
Degree_C
10
19-07-10
0:01:22
0.419
mS
21.7
Degree_C
11
19-07-10
0:01:24
0.419
mS
21.7
Degree_C
12
19-07-10
0:01:26
0.419
mS
21.7
Degree_C
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com