9
Selecting Temperature Unit of Measure
1. When the meter is first powered on the default scale setting is set to
Celsius (°C).
2. Press the
°C/°F
button to toggle between Celsius and Fahrenheit.
Note:
The meter will automatically save the selected unit when turned off
as the new default.
Taking Measurements
Once the meter has been setup
and the Pt100 probe has been
connected, place the temperature
probe in the area being tested.
Give the meter several seconds
to stabilize. Read the temperature
measurement on the LCD. If "- - - -"
appears on the display, either the
reading is out of range or the Pt100
probe is not connected or it may
be defective.
Note:
The temperature sensor is
located at the tip of the Pt100
probe. To accurately test internal
temperatures, make sure the probe is inserted at a distance of at least 15
times the diameter of the metal sheath as indicated in the diagram.
Data Hold
1. Press the
HOLD
button to freeze the current reading on the display.
2. Press the button again to resume normal operation.
Note:
When Data Hold is active the
MAX/MIN/AVG
,
°C/°F
and
REL
buttons are disabled.
Backlight
Press the BACKLIGHT button to turn the LCD Backlight on and off.
Note:
The backlight will automatically turn off after 10 seconds.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at: