11
2. To turn this function off, press and hold the
HOLD
button while
powering on the meter.
3. Release both buttons simultaneously.
4. There will be successive beeps emitted from the meter at start up
while the Auto Power Off indicator will not appear on the display,
confirming this feature is now disabled.
5. If the meter is turned off then back on, the "Auto Power Off" feature
will be enabled again.
Turn the power "OFF" before attempting the following SETUP procedures.
The setup mode will be cancelled if during the following procedures the
POWER
button is pressed.
Pt Type Selection
While the meter is off,
press and hold the
POWER
and BACKLIGHT
buttons for 2 seconds to enter the setup function. Press the
HOLD
button to enter the Pt selection function. Press the
MAX
button to toggle
between Pt probe type as indicated by Pt100, Pt500 and Pt100. Press
the
°C/°F
button to confirm the selection.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at: