10
Relative Function
1. Press the
REL
button to store the current measurement.
2. Under this mode, the meter will display the difference between any
new measurement and the stored measurement.
3. Press the
REL
button again to exit Relative function.
MAX/MIN/AVG Function
When the
button is pressed, the meter will enter the MAX/MIN/
AVG function. Under this function, the maximum value, minimum value
and average values taken during the measurement process will appear on
the lower part of the display when selected.
Note:
The average value is calculated using the last 8 readings in memory
and will update with every new reading.
1. The first value to appear on the display in this function is the
Maximum value as indicated by the "MAX" symbol and is updated
when a new maximum data value has been taken.
2. Press the
button again and the Minimum value will now
appear on the display as indicated by the "MIN" symbol and is
updated when a new minimum data value has been taken.
3. Press the
button a third time and the Average value will now
appear on the display as indicated by the "AVG" symbol.
4. Press the
button a fourth time and the "MIN", "MAX", "AVG"
symbols will blink simultaneously while continuing to update the
readings in memory and can be viewed by returning to the appropriate
function. While in this function, the meter is displaying the current
measurement value only.
5. To exit the MAX/MIN/AVG function, press and hold the
button
for two seconds.
Note:
When the meter is in MAX/MIN/AVG function, the
REL
and
°C/°F
buttons are disabled.
Auto Power Off
1. To preserve battery life, the meter is programmed to turn off after
30 minutes of inactivity.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
