Reechcraft PowerPole, Руководство по безопасности оператора

Страница: 32 / 48

32
secti
On
POwER SYSTEM INSTALLATION
5
9. Repeat steps for each mast assembly.
10. Be sure that the electrical power cords are disconnected from the
power source before attempting to connect the drills to the cords.
Be sure the drill triggers are NOT locked in the ON position. Using
appropriately sized electrical cords (Fig. 5.1) connect the drills
together into 1 circuit. Be sure to properly manage the cords by
securing them to the rail system (Fig. 5.5). Eliminate any conditions
which would allow the electrical cords to catch on clothing, tools,
materials or any other obstruction.
POWER CORD INSTALLATION
Fig. 5.5
11. Ensure that the cords are fastened together and joints won’t
disconnect during operation. Ensure there is sufficient cord for the
full height of travel and that the electrical cords will hang vertically
down to the ground, without interfering
with the PowerPole climbing
units or work platform. Protect
all cords from any sharp edges
or locations that could cause
wear or damage to the cords
in any way.
Fig. 5.6