7
3. Remove the two M6 x 30mm Union Bolts (54) and
the two packing spacers (not shown) from the front
of the Frame (1). Discard the packing spacers.
Attach a Wheel (50) to one side of the Frame (1)
with an M6 x 30mm Union Bolt (54) and two M5
Washers (66) as shown.
Attach the other Wheel (50) to the other side of the
Frame (1) in the same way.
54
54
1
50
66
66
66
4. Turn the rear Adjustment Knob (44) counterclock-
wise one half of a turn. Pull the Adjustment Knob
and insert the Saddle Post (9) into the Frame (1).
Slide the Saddle Post to the desired height, re-
lease the Adjustment Knob, and move the Saddle
Post up or down slightly until the Adjustment Knob
snaps into one of the adjustment holes in the
Saddle Post. Then, retighten the Adjustment Knob
until it is snug; do not overtighten the
Adjustment Knob.
4
1
44
9
3
5. Loosen the M8 x 48mm Bolt (20) several turns
without removing it. Next, turn the Upper Saddle
Clamp (18) one quarter of a turn, and set the rails
of the Saddle (7) in the grooves of the Lower
Saddle Clamp (19). Then, lift the Upper Saddle
Clamp, turn it back to its original position, and set it
on the rails. Ensure that the Saddle is level and all
the way forward on its rails. Firmly retighten the
Bolt.
20
19
18
7
Rails
5