Reebok i-Bike.SE
04
Customer Support 0800 440 2459
Reebok i-Bike.SE
05
reebokfitness.info
Assembly
Stabiliser
1. Remove the bike from the box.
2. Remove the transport stabiliser, located at the back of the product. These bolts
are 2 x 854 .
3. There are three holes in the rear stabiliser (347). Attach the rear stabiliser to the
main frame, as shown, by fixing 2 x 854 bolts and 2 x 807 spring washers into
the bottom two holes.
4. Now fix the rear stabiliser by inserting 1 x 215 bolt in the top hole, along with 1 x
807 spring washer and 1 x 373 flat washer.
You will require:
You will require:
807
x 3
215
x 1
373
x 1
854
x 2
419
x 1
419
5. Once complete, clip the plastic cover (419) over the stabiliser.
To aid access to the bolt holes during assembly, it may help to place the bike
body on a piece of polystyrene packaging.
1
373
215
807
347
807
854
5/6mm
RFE4489_RE014101_iBikeSE_UMFINAL.indd 4-5
25/06/2010 15:14
