USER MANUAL
23
2. Slide it back until you reach the bottom of the rail.
3. Slide the wedge into the slot between the fin and the casing.
4. The fin is installed.
12.8
DEFLATION AND STORAGE OF THE BOARD:
•
Remove the fin.
•
Clean valve area before opening.
•
Depress the valve stem to release air from the table to release the top pressure. Once the
pressure has decreased, you can depress the valve spout to lock it in the open position.
•
Leave the valve open while deflating the board towards the valve (front to back).
•
When finished, close the valve with the cap to prevent mold or debris from entering the
tube.
•
DO NOT keep a wet board in its storage bag for more than a day. As soon as possible,
unroll it and let it dry.
•
Before storing your board, rinse it and let it dry to prevent mold growth. Clean the water
bike with clean fresh water. DO NOT use harsh chemicals to clean your board. Clean your
board only with clean water. If some stains persist, you can clean them with soapy water,
you can use a few drops of soap with a neutral PH. Most stains can be removed with mild
soap and water.
•
When you store your water bike, keep it out of direct sunlight and it should be sheltered
from the weather.
CAUTION:
For prolonged periods of storage, leave the board extended on a flat surface at about 0.5 PSI,
so that it does not take deformations or vices in the folds.
•
Store your board in a clean, dry place. If you store your bicycle deck outdoors, do not leave it in
direct contact with the ground, cover it to protect it from natural external elements (sun, dust,
wind...).
•
We do not recommend hanging your board from the bike frame.
