RedSeven Amplification MSLM, Быстрый старт

Страница: 6 / 15

6
BACK PANEL
(left to right)
1. POWER CONNECTOR: 90V to 240V AC accepted. MSLM can be powered worldwide without
any issue. Be sure to use a proper grounded cable.
2. MIDI INPUT/THRU: midi input and output socket. Midi input is wired in parallel to front midi
input connector. They should be used one at time, to avoid any issue. Midi thru is a buffered
copy of midi input, so the midi signal is let thru without any modification.
3. SW1/2: stereo connector for switch 1 and 2. You need a proper Y cable to use both of them.
4. D-OUT: dedicated dry path output.
5. OUTPUTS (L/Mono and R): main outputs of the mixer, done by a un balanced mono jack
connectors.
6. AX2R (Right and Left): Return of AUX2 loop, both right and left.
7. AX1R (Right and Left): Return of AUX1 loop, both right and left.
8. AX2S (Right and Left): Send of AUX2 loop, both right and left.
9. AX1S (Right and Left): Send of AUX1 loop, both right and left.
10. FX3R (Right and Left): Return of FX3 loop, both right and left.
11. FX2R (Right and Left): Return of FX2 loop, both right and left.
12. FX2R (Right and Left): Return of FX1 loop, both right and left.
13. FX3S (Right and Left): Send of FX3 loop, both right and left.
14. FX2S (Right and Left): Send of FX2 loop, both right and left.
15. FX1S (Right and Left): Send of FX1 loop, both right and left.
16. L3R and L3S: Send and Return for Loop 3 (L3).
17. L2R and L2S: Send and Return for Loop 2 (L2).
18. L1R and L1S: Send and Return for Loop 1 (L1).
19. IN L/Mono and R: main input of MSLM.