14
It is recommended that the shower unit and accessories be cleaned using a
soft cloth and that the use of abrasive or solvent based cleaning fluid be avoided,
especially on any plated finishes.
We recommend that before any cleaning, the isolating switch be turned off,
thus avoiding accidentally switching on the shower.
All water contains particles of lime-scale, which build up in the shower handset
and unit reducing the performance.
It is therefore important to clean the shower handset by simply rubbing the
rubber nozzles, or soaking in a proprietary lime-scale remover and rinsing
thoroughly before use.
NOTE:
After use it is normal for some water to drip from the shower handset for
a few moments. This inhibits lime-scale build-up over prolonged use.
WARNING:
YOU MUST REGULARLY INSPECT THE SHOWER HOSE FOR WEAR AND
DAMAGE AND REPLACE IF NECESSARY, OR EVERY 2 YEARS, WITH OUR
APPROVED PART.
IN ORDER TO MAINTAIN THE PERFORMANCE OF YOUR SHOWER,
YOU MUST CLEAN THE SHOWER HANDSET REGULARLY.
YOU MUST REGULARLY INSPECT THE HANDSET FOR WEAR AND
DAMAGE AND REPLACE IF NECESSARY, WITH OUR APPROVED PART.
CLEANING THE FILTER
It is recommended that the filter is periodically cleaned in order to maintain the performance of the
shower. It is essential that this operation is carried out by a competent person.
WARNING!
SWITCH OFF WATER SUPPLY AT THE MAINS BEFORE REMOVING FILTER.
The inlet filter is situated inside the water inlet fitting
(fig.19)
.
To gain access there is
no need
to remove
the front cover and backplate lower section.
Unscrew the filter body on the water inlet fitting
(fig.18)
.
Remove the filter body and flush with clean water
and then replace.
When cleaning the filter,
DO NOT
use a sharp object,
as it will cause damage.
It is preferable to use an old toothbrush or similar
The metal filter mesh is best to be cleaned when it is
on the body as shown.
Take care to re-position the filter correctly.
18
HOW TO MAINTAIN YOUR SHOWER
