Product Safety:
•
The water boiler is only to be installed in locations where it is overseen and where mainte-
nance is restricted to trained personnel.
•
Always turn the appliance off after use, and allow it to cool down. Once it has cooled down,
unplug before adjusting, moving or cleaning.
WARNING: Metal surfaces may become very hot whilst in operation.
Use caution when touching these surfaces.
Before Connection to the Power Supply
•
Remove all packaging and plastic coating from the appliance.
•
Check the unit has not been damaged in any way during transportation.
If any damage is found, it MUST be reported to our After Sales department
immediately by
calling 0
344 879 3588
.
•
Remove any protective coating from the outer panels.
•
Check the available power supply corresponds to that shown on the rating label of the
appli
-ance.
Water Connection
•
Connection to the cold water supply and the appliance is made via the hose supplied.
•
In hard water areas, it is advisable to fit a filtration unit to limit scale deposits.
Electrical Connection
•
All electrical work must comply with all relevant wiring regulations and carried out by a quali
-
fied electrician.
•
3kW models require connection to a 13 Amp double pole isolating switch.
•
Isolation switches for the appliance must not be obstructed and accessible.
•
To protect against fire, electric shock and personal injury, do not immerse cord, or water boiler
in water or any other liquid.
WARNING:
THIS APPLIANCE MUST BE EARTHED
Electrical Requirements:
Check that the voltage on the rating plate of your appliance corresponds with your electricity supply
which must be A.C. (Alternating Current).
7
