Redmond RMC-M222S-A, Руководство пользователя

Страница: 21 / 24

21
ENG
RMC-M222S-А
Walls of the cooking chamber, surface of the heating disk, and the
casing of central thermal sensor (located in the middle of the
heating disk) can be cleaned with a damp (not wet!) sponge or
cloth. Remove any traces of soap or detergent if using any to
prevent unwanted odors during cooking.
If there is a foreign object in the cavity around central thermal
sensor, carefully remove it using tweezers, trying to avoid pressing
on the casing of the sensor. Clean heating disk with a damp
medium-hard sponge or synthetic brush, if necessary.
When the multicooker is used on a regular basis, heating disk
may partially or completely change color, which does not indicate
a defect and does not affect proper operation of the unit.
Storage and transportation
If the appliance is not used for a long time, be sure to unplug it.
The working chamber, including the heating disk, bowl, inner lid
and steam valve must be dry and clean.
Store the assembled appliance in a dry, ventilated place away from
heating appliances and direct sunlight.
During transportation and storage, do not expose the device to
mechanical stress, that may lead to damage of the device and/or
violation of the package integrity.
Keep the device package away from water and other liquids.
VI. ADDITIONAL ACCESSORIES
Additional accessories for the multicooker and information on the
innovations are available through www.redmond.company and
our authorized dealers.
VII. BEFORE CONTACTING
SERVICE CENTRE
Problem Possible cause Solution
Display shows the
error code: Е1 – Е5
System error, device overheating,
failure of control board or heating
element are possible
Unplug the device and let cool down.
Check the presence of the bowl in the
device and sufficient volume of the
product in it, close the lid tightly. Plug
in the appliance and restart the
program. If the problem persists,
contact an authorized service center
Appliance does not
switch on
Power cord is not connected to the
appliance and/or socket
Ensure that the power cord is con-
nected to the corresponding inlet
on the housing of the appliance and
to the socket
Wall socket is not working prop-
erly
Connect to a properly working wall
socket
Power supply failure
Check the power supply. If not avail-
able, contact local electricity supply
company
Dish is taking too
long to cook
Power supply interruption (power
supply is unstable/underrated)
Ensure that the power supply is sta-
ble. If unstable /underrated, contact
local electricity supply company
There is a foreign object between
the bowl and the heating element
(grain, food particles, debris, etc.)
Unplug the appliance and let cool
down. Remove foreign object or
objects
The bowl is not properly posi-
tioned
Properly position the bowl into
place
Heating disk is dirty
Unplug the appliance and let cool
down. Clean heating disk
Hot steam escapes
from under lid dur-
ing cooking
Inner lid and
cooking bowl
fail to seal her-
metically
The bowl is not
properly posi-
tioned
Properly position the bowl into
place