Redmond RMC-M222S-A, Руководство пользователя

Страница: 13 / 24

13
ENG
RMC-M222S-А
2. Adjust the temperature. Use the “+” button to increase and
“–“ to reduce the temperature. Press and hold the
corresponding button down to scroll through the digits. After
the maximum (minimum) value is reached the adjustment
starts from the beginning.
3. To save the adjustments do not press any button for 5 seconds.
For overheat protection when the temperature is set above 300°F
(150°С) the maximum operating time of the program is limited
to 2 hours.
To Adjust Cooking Time
1. Press the “Time” button during a cooking cycle. The time value
indicator on the display will begin to flash.
2. Adjust the time. Use the “+” button to increase and “–“ to reduce
the time.
3. Repress the “Time” button and set the minute value using “+”
and “–” buttons. Hour and minute value increase irrespective
from each other. Press and hold the corresponding button down
to scroll through the digits. After the maximum (minimum)
value is reached the adjustment starts from the beginning.
4. To save the adjustments do not press any button for 5 seconds.
If the time value is set to 00:00, the program operation will be
stopped.
Time Delay Function
The Time Delay function enables programming the appliance to
start cooking at a specific time. A cooking cycle can be delayed
between 1 minute and 24 hours in 1 minute increments.
1. Press “Menu” button repeatedly to select the program.
2. Press “Time Delay” button. Time indicator starts blinking.
3. Use the “+” and “—“ buttons to adjust the hour value (press
the “+” to increase and “—“ to reduce the value). Press and
hold the corresponding button down to scroll through the
digits. After the maximum value is reached the adjustment
starts from the minimum value.
4. Press the “Start” button. The time left before the start of the
cooking program will start to count down.
5. To cancel the adjustments press the “Cancel/Reheat” and
start over.
It is not recommended to use Time Delay function if dairy and other
perishable products are being used (eggs, fresh milk, meat, cheese etc.).
Time Delay function is available in all automatic programs except
“SAUTE”, and “QUICK COOK”.
When adjusting Time Delay, please note that the “STEAM”, “SAUTE”,
“GRAIN” и “SOUP” program countdown begins only upon reaching
the operating temperature.
Keep Warm Function
Function is being automatically activated at the end of the cooking
program. When the program finishes, the temperature of the meal
160-170°F (70-75°C) is being maintained for a period of time up to
12 hours. Keep Warm countdown is displayed. Press “Cancel/Reheat”
button to disable the function. “KEEP WARM” indicator goes off.
Keep Warm function is available in all automatic programs except
“YOGURT” and “QUICK COOK”.