Redmond RMC-M222S-A, Руководство пользователя

Страница: 12 / 24

12
changing symbols will be displayed during the connection
process. After the connection is made three short audible
signals will be heard and the appliance will switch to the
standby mode.
If the connection isn’t made within 30 seconds, the appliance
will make two short audible signals and switch to the standby
mode.
5. To disable the remote control feature in the standby mode
press and hold down “–” button until the long audible signal
is heard .
To provide a stable connection, your mobile device should be
located no more than 15 meters away from the appliance.
Setting the Temperature Measurement Units
In the multicooker RMC-M222S-А you can choose one of two
temperature units: Fahrenheit (°F) and Celsius (°C) degrees. By
default, the temperature measurement unit is set to Fahrenheit
(°F).
To configure the temperature units, follow the following steps:
1. In standby mode (the display shows - - - -), press and hold down
the “Temp.” button, the display will show the value of 212°F.
2. Press shortly the “Temp.” button to select the desired
temperature units: 100°C or 212°F will flash on the display,
switching is performed in a circle.
3. Do not press the buttons on the control panel for a few
seconds. Wait until the selected value on the display goes off.
4. Next time you turn on the multicooker, it will display the
temperature in the selected measurement units.
Control panel lock
To provide extra safety the appliance is equipped with the control
panel lock, which prevents the accidental button pressing.
To enable the control panel lock in any mode, except program
setting prior to the start and connecting to the mobile device via
the Ready for Sky app, press and hold the “Menu” button, [ ] symbol
will appear on display.
To disable the lock repress and hold the “Menu” button, ] [ symbol
will appear on display.
When pressing the buttons with the enabled control panel lock
[ ] symbol will appear on display.
Disabling audible signals
To enable/disable the audible signals in the standby mode press
and hold down the “Time Delay” button. Its indicator will blink.
When re-enabling the audible signals the appliance will make a
short audible signal.
“MASTERCHIEF LITE” Function
The function is not applicable for “QUICK COOK” programs.
The cooking temperature can be adjusted between 95°F (35°C)
and 360°F (180°С) in 1°F (1°С) increments. The minimum cooking
time – 1 minute, the maximum cooking time depends on the
selected program, the adjustment range – 1 minute.
To Adjust Cooking Temperature
1. Press the “Temp.” button during a cooking cycle. The
temperature value indicator on the display will begin to flash.