manualshive.com logo in svg

RedMax EXZ2401S-PH, Руководство оператора, Страница: 44 / 112

Поделиться
Скачать
RedMax EXZ2401S-PH Скачать руководство пользователя страница 44

44

8. Operation (BC-EX2 only)

(Optional blade usage)

English

When sharpening, removing, or reattaching the
blade, be sure to wear thick, sturdy gloves and use
only proper tools and equipment to prevent injury.

■

CHOOSE THE BLADE

Choose a suitable recommended cutting attachment
according to the object to be cut. 
• When replacing blade always be sure to use

products which have been certified by RedMax.

(1) 9” 22-tooth :

SST229

(2) 9” 24-tooth :

SST249

(3) 8” 8-tooth :

SGB088

(4) 9” 8-tooth :

SGB089

(5) 8” 4-tooth :

SGB048

(6) 9” 4-tooth :

SGB049

(7) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass

■

SET UP 

1. Detach the line head assembly. (OP2)
2. Put on the blade, making the marked side face the

shaft side, put the holder and the cover on, and
fasten the blade with the nut. (OP2)

(1) Cover :

3540-13283

(2) Holder (B) :

6019-13250 (Attachment)

Change to the debris guard which is suitable for the
metal blade. (OP3)

TIGHTENING TORQUE : 

130~174 in-lbs 

(14.7~19.6 N.m.)

(1) Guard-A : 5764-24000
(2) Guard :

5766-24110

(3) Bracket : 3250-24120
(4) Bolt :

0225-10620

(5) Screw :

0263-30614

(6) Nut :

0280-10605

IMPORTANT

WARNING

(1)
(2)

(3)
(4)

(5)
(6)

(7)

(A)

(B)

(C)

(D)

(1)

(2)

BC-EX2
OP2

BC-EX2
OP3

Содержание EXZ2401S-PH

















































































































Отзывы:

Нет отзывов