manualshive.com logo in svg

RedMax EXZ2401S-PH, Руководство оператора, Страница: 24 / 112

Поделиться
Скачать
RedMax EXZ2401S-PH Скачать руководство пользователя страница 24

24

6. Set up (PS-EX only)

English

(1)

(2)

(3)

(4)

(5)

PS-EX
SE1

PS-EX
SE2

PS-EX
SE3

■

ATTACHING THE PRUNING MECHANISM (SE1)

1. Remove the cap on the end of the main pipe.
2. Remove the screw screwed into the end of the gear

case.

3. Insert the end of the gear case into the main pipe.
4. Line up the hole on the end of the gear case into

which the screw is to be inserted with the hole on the
main pipe, and screw the screw firmly in.

5. Using a wrench, screw in the bolt provided to fix the

mechanism into place. 

(1) Main pipe

(2) Gear case

(3) Screw hole

(4) Fastening bolt

(5) Bolt

A standard package contains the items as shown
below. (SE2) 

(1) Guide bar 

(2) Saw chain 

(3) Gase case 

(4) Sprocket 

(5) Chain tension adjust screw 

(6) Nut 

(7) Chain tensioner nut  (8) Chain cover 

Install the guide bar and the saw chain on the gear
case as follows. 

The saw chain has very sharp edges. Use
protective gloves for safety. 

1. Loosen a nut and remove the chain cover. 
2. Mount the guide bar then fit the saw chain around

the bar and sprocket. (SE3)

Pay attention to the correct direction of the saw
chain 

3. Fit the chain tensioner nut into the lower hole of the

guide bar, then install the chain cover, and fasten
the mounting nut to finger tightness. (SE3)(SE4)

(1) Hole      (2) Moving direction 
(3) Chain tensioner nut 

WARNING

WARNING

PS-EX
SE4

Содержание EXZ2401S-PH

















































































































Отзывы:

Нет отзывов