12
4.4 USER INPUT WIRING
If not using User Inputs, then skip this section. Only the appropriate User Input terminal has to be wired.
Sourcing Logic (
USrACt Hi
)
When the
USrACt
parameter is programmed
to
Hi
, the user inputs are internally pulled
down to 0 V with 20 K
W
resistance. The
input is active when a voltage greater than
2.2 VDC is applied.
USER COMM
USER
2
USER
1
10
11
9
OR
Sinking Logic (
USrACt Lo
)
When the
USrACt
parameter is programmed
to
Lo
, the user inputs are internally pulled
up to +3.3 V with 20 K
W
resistance. The
input is active when it is pulled low (<1.1
V).
10
9
11
+
-
(30V max.)
SUPPLY
V
USER COM
M
USER
2
USER
1
OR
4.5 SETPOINT (ALARMS) WIRING
4.6 SERIAL COMMUNICATION WIRING
4.7 ANALOG OUTPUT WIRING
See appropriate option card bulletin for wiring details.
5.0 r
eviewing
The
f
rOnT
b
UTTOns
and
d
isPlay
Programmable Units Display
Display Line 1
Display Line 2
1
3
2
4
Setpoint Annunciators
KEY
DISPLAY MODE OPERATION
PROGRAMMING MODE OPERATION
D
Index Line 2 through enabled, max/min/input/total, readouts
Quick exit to display mode
P
Access the parameter and hidden display loops
Access the programming parameter menus, store selected
parameter and index to next parameter
!
Function key 1; hold for 3 seconds for second function 1*
Increment selected parameter value
@
Function key 2; hold for 3 seconds for second function 2*
Decrement selected parameter value
*Factory setting for F1 and F2 is no mode
The PAX2A display consists of a large, 6-digit upper display referred to as Line 1 and a smaller 9-digit lower display referred to as Line 2. Line 1
can be configured to show one of several values, including the main input reading, min, max, setpoints or total values. Line 2 can be used to display
several selectable values including; input value, min, max, total, list, setpoint values, and other values. For these values the mnemonics is shown in
the left most digits of Line 2. To the right of Line 1 is a Programmable Units Display. This display consists of 3 programmable digits that are user
defined as mnemonics for Line 1.