RDL-2000
User Manual
70-00143-01-01a
Proprietary Redline Communications © 2010
Page 22 of 50 September 24, 2010
3.4 Installation Screen - Basic
Use this screen to enter addressing information and monitor the wireless link. Different
information is displayed for the Master and Slave.
Figure 13
:
Link Mgr - Basic Installation Screen - Master
Figure 14
:
Link Mgr - Basic Installation Screen - Slave
MAC Address
: Hardware (MAC) address of the connected RDL-2000. This address is
also recorded on the RDL-2000 chassis label.
IP Address
: IP address for this RDL-2000. The IP address is routable through the
Ethernet port and over the wireless interface.
Note: The default gateway setting can not be viewed or modified by the operator. The
default gateway IP and MAC address is learned automatically during network discovery
following a system rebooted.
Subnet
Mask
: IP subnet mask.
MU ID
: (Slave only) Enter the identification number for this wireless link. The ID structure
is the same format as a MAC address.
A wireless link can be established only between pairs of RDL-2000 systems having
identical ID settings. This feature ensures that following power-up, reboot, and DFS
events, a wireless link is established only between designated pairs of RDL-2000 units.
