REDLAKE MASD, INC.
3.10.2 Enabling the Reticle
·
With a recorded image
sequence in the
window, click on the
Reticle button. The
Reticle menu appears
with the Reticle
Enable field shown.
Alternatively you may
right click on the
image and a menu
appears. Click on
Reticle Enable and a
check mark appears
on the menu. You can
now set data points
and calibrate the
reticle markers. See
Figures 3-17 and 3-18.
Figure 3-17 Enabling the Reticle Feature.
3.10.2.1 Entering Set Points
Click and drag the reticle (or place the pointer over a location
and click) to place the reticle cross point over the point of
interest on the image. Release the mouse
button to place the reticle at the desired location.
See Figure 3-19.
Figure 3-18 The Right Click Reticle Menu.
This places a Set Point at
where the reticle lines
intersect. The color of the
marker indicates that this point
is on the current frame. Refer
to paragraph 3.10.1 above.
Place another set point on the
image to enable you to scale
or calibrate the reticle. In this
case we place the second
marker at the end of the
handle of the racquet since we
know the length of the racquet.
Figure 3-19 The Second Marker.
_____________________________________________________________________________
9400-0010 Rev S
3-10
02/15/02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
