6
Installation Kit
Kit includes:
Warning:
Removal of the wired screws and lead seal
(16)
from the valve body
(7)
will
destroy the pressure relief calibration and void the warranty! If service to the valve
assembly effecting calibration is required, it must be returned to manufacturer for
service.
Field Provided Items
Items to be supplied by installer:
(see Figure 2 on page 8)
Pipe & Flexible Metal Connection
(33)
Pipe Fittings
Drip leg
(31)
with Drain Port
(38)
¼” line
(37)
to connect Valve Body water
drain hole
(24)
to Drip Leg
(31)
A two inch (2”) Female NPT Pipe Union
(12)
(see Figure 2 on page 8)
Materials for providing supplemental support of
valve (3/4” iron pipe)
Typical Installation
One (1) Pre-assembled RS-2
RuptureSeal
™
which includes:
3 O-rings
(1)
,
(2)
&
(3)
Eight (8) 1/4” Stainless Steel Cap Screws
(4)
One (1) Collection Trap Chamber Cover
(5)
One (1) Carbon Fragment Collection Trap Canister Insert
with Special Tack Compound
(6)
One (1) Tee Connection
(14)
with plug
One (1) Tell-Tale Pressure Gauge 30” Hg - 0-30 psig
(21)
One (1) Double Check Pressure Equalizing valve
(22)
with Filter/Vent
(34)
One (1) Installation Operation & Maintenance Manual
NOTE:
See Figure
3 on Page 9
for location
of parts on
assembled
unit.
Chiller