SunRise – Installation Manual
RE_PROD_0005 Version 3
Page 13 of 28
Issue Date 16/11/2020
Grid and Emergency Power Supply (EPS)
To connect the cables to the system, secure the exposed end of the
cable into the correct terminal block and secure by tightening with a
flat-head screwdriver.
The Terminal Blocks are labelled as shown to the right.
4.3. Auxiliary Earth Fault Alarm
RedEarth’s Sunrise has two terminal blocks for the installation of a
third-party alarm. These 2 terminals are on the same din rail as the
EPS terminals and can be identified by their smaller size, with the grey
terminal set as the active and the blue the neutral.
To install the third-party alarm, replace the resistor (wrapped in heat-
shrink) with the new device.
Installation
