SunRise – Installation Manual
RE_PROD_0005 Version 3
Page 6 of 28
Issue Date 16/11/2020
Opening the SunRise
RedEarth’s SunRise Home Battery System can be internally
accessed by removing the front cover. To do this, remove the nine
(9) screws with a Philips screwdriver (PH2), lift and pull the cover
away from the unit and place in a safe location.
Inside
The SunRise can be divided into three main areas. On the Lefthand side
(LHS) is the Inverter, in the middle are the batteries and on the Righthand
Side (RHS) are the electrical devices.
Righthand Side (RHS)
Here you will find the Sungrow SH5K-30 facing
outwards and all the connections to it are on the bottom side. Also in this area
are the terminal blocks that will communicate with the meter.
Middle
This general area is where the batteries are located. A complete set
will have either 5 Pylontech or 6 RedEarth Lithium Batteries
(SunRise Mini will have 3 RedEarth Lithium Batteries).
The terminals on the back panel and above the batteries are for
the connection of the thermal relay and the heat extraction fans.
Lefthand Side (LHS)
Here you will find all the connection points for the power cables and the
protection devices.
Access to this area is narrow and limited, we strongly recommend doing the
electrical connections before installing the batteries.
Components
Removal of the cover must only be
done by qualified personnel.
