IMPORTANT: The heat output is controlled by the thermostat, according to the
room temperature. Set the thermostat dial fully clockwise to the maximum position
initially.
When the room is warm enough, reduce the setting by slowly turning the thermo-
stat dial counter-clockwise until the heater “clicks.”
This will then maintain the
room temperature at the desired level.
F
LA
ME
I
N
T
ENS
IT
Y
: Turn the dimmer dial clockwise or counter clockwise to get the
desired flame intensity. The dimmer switch can only be used when the POWER
switch is in the I position.
NOTE
: When the POWER switch is turned to the OFF position, all other heater
functions will stop even though the switches may be in the I position.
CAUTION:
If you use this heater in conjunction with a thermal control, a program controller, a
timer or any other device that switches on the heater automatically, remember to
observe all safety warnings at all times.
The stove heater has safety overheat protection. If the overheat protection trips,
turn off the Power Switch and unplug the power cord from the receptacle. It will
reset automatically after five minutes.
