8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or
similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
areas and where it will not be tripped over.
9. To disconnect the appliance, turn Power Switch to off, wait for heater to cool down and
shut off, and then remove plug from outlet.
10. Connect to properly polarized outlets only. This product requires a three prong outlet
with ground.
11.Do not insert or allow foreign objects to enter into ventilation opening as this may cause
an electric shock, fire or damage the appliance.
12. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use
on soft surfaces, like a bed, where openings may become blocked
14. Use this appliance only as described in this manual. Any use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
15. Always plug heaters directly into a wall outlet receptacle. Do not use an extension cord.
16. To prevent overload and blown fuses, be sure that no other appliance is plugged into the
same outlet on the same circuit.
17. It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord which
becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical
outlet (receptacle). Worn outlets or receptacles should be replaced prior to further use of the
heater. Plugging this heater into a worn outlet (receptacle) may result in overheating of the
power cord or fire.
18. Be sure that the plug is fully inserted into an appropriate receptacle. Please remember
that receptacles also deteriorate due to aging and continuous use: check outlet and cord
