R
ADIO
Warnings and Compliance
FCC Compliance Statement!
The radio included with your vehicle complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful Interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operations.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC ID: 24025
(please note that there maybe additional alpha numeric codes added to this number)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operations of this device.
WARNING:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
WARNING
: While operating the Radio, a separation distance of at least 20 centimeters must be maintained
between the radiating antenna and the body of the user or nearby persons in order to meet the FCC RF
exposure guidelines.
AFHDS (automatic frequency hopping digital system)
AFHDS was developed for Radio control models and offers active and passive anti-jamming capabilities, low power
consumption and high receiver sensitivity.
This radio system works in the frequency range of 2.405 to 2.475GHz. This band has been divided into 141 independent
channels. Each radio system uses 16 different channels and 142 different types of hopping algorithm. By using various
switch-on times, hopping scheme, and channel frequencies, the system is less likely to lose transmission.
Each transmitter has a unique ID. When binding with a receiver, the receiver saves that unique ID and can accept only
data from that unique transmitter. This avoids picking another transmitter signal and dramatically increases interference
immunity and safety.
WARNING:
Even with the AFHDS technology, if the radio system is not used in accordance with this manual, it can still
fail and cause serious injury. Be sure to read and understand this entire manual, as well as the manual that came with all
other RC components you are using.
White
Red
Black
CH2 - ESC Plug
Yellow
Red
Black
CH1 - Servo Plug
Wire Colors
Redcat Racing
12
RADIO GUIDE
