RedBack Laser EGL624 Скачать руководство пользователя страница 6

Страница: 6 / 16

www.redbacklasers.com.au

EGL624

OPERATING INSTRUCTIONS

Battery Instructions

To charge this battery pack simply inserting the charger plug into the charging

socket above the locking screw. The LED on the charger is illuminated red

during the charging process and will turn green once the batteries are

fully charged. Battery pack can be charged while inserted in the laser or

independently.

When the power LED on the keypad flashes, the rechargeable battery pack

needs recharging or standard batteries need replacing. Note the charger will

only charge the supplied rechargeable battery pack.

Handy Hints

•

Prior to initial use, charge the rechargeable batteries for at least 8

hours.

•

Running rechargeable batteries completely flat will increase battery life.

•

The EGL624™ can operate off mains by plugging the charger (for

indoor use only) into the unit.

•

Remember the EGL624™ can operate using standard batteries when

rechargeable pack is out of charge.

The EGL624 has two battery options either 4 x standard “C” size Alkaline or

the Ni-Mh rechargeable pack. For standard 4 x “C” alkaline operation simply

insert into standard battery holder in the direction indicated and slide into

battery recess and tighten the locking screw.

To use the rechargeable

battery

pack

first

remove standard pack

if inserted and place

into the same battery

recess and tighten

locking screw.

Содержание EGL624

















Результаты поиска

Содержание EGL624

Отзывы:

Похожие инструкции для EGL624

Бренды по названию

Популярные бренды

RedBack Laser EGL624, Инструкция по эксплуатации

Результаты поиска

Содержание EGL624

Отзывы:

Похожие инструкции для EGL624

Бренды по названию

Популярные бренды