Redarc BMIS series, Инструкция

Страница: 7 / 20

1 INSTALLATION
STEP 3.
Insert and secure the Data connector, ensuring that pins align correctly before insertion by
aligning the guides on the plug housing.
The wiring diagram for the data connector is on page 10.
6
A SEALING PLUG SHOULD BE USED IF DATA CONNECTOR IS NOT USED. IF ALTERNATOR FIELD WINDING NOT
CONNECTED, ACTIVATING THE SWITCH MAY NOT STOP THE ENGINE.
ENSURE THE SWITCH IS IN THE OFF POSITION (MARKED ‘0’) BEFORE COMMENCING THIS STEP.