Red20Rc R450 Spider, Руководство пользователя

Страница: 15 / 16

© Red20RC 2015
15
As mentioned earlier, the frame is designed to give you as much access as
possible to everything
after it is completed. The only time you might want to
deviate from this is when running cables between the main plates or through
the arm roots.
On the prototype we didn’t use a power distribution board, instead opting to use
a 4-way power distribution cable, sandwiched between the plates.
Mounting slots are provided throughout to make it as easy as possible for you to
secure your gear. We recommend zip-ties or “Rapstraps” for the ESCs, Rx and
VTx whilst a commercial battery strap should fit nicely on the bottom plate to
secure your LiPo.
The leg roots do have a small notch cut in them that will allow you to run a small
zip-tie through to secure the ESC.