Red20Rc R450 Spider, Руководство пользователя

Страница: 6 / 16

© Red20RC 2015
6
The R450 Spider Quad has been designed to offer a number of different
configuration options with regards to camera and flight controller mounting.
You can choose between fixed or vibration isolated mounting points. The
vibration isolation mount is sized to suit the APM or Pixhawk style controllers
but will also support the DJI Naza. An M3 sized hole is provided in front of the
vibration plate for mounting a GPS post.
The top plate is drilled to accept 2 sizes of flight control board so you can use
either Naze32 or CC3D size boards, or even a full size KK2.1.x if required.
The frame has mounting holes as standard to support the following options:
Tarot 2D Gimbal – screw mount to the bottom plate (not rail mounted).
Mobius style vibration isolation plate can be mounted either above or below
the main plates.
Case FPV camera can be mounted via the pre-drilled M3 hole either above or
below the main plates.