background image

1.1 Important Notes

  

This multi-functional RC model is not a toy. 

 

 

In case of any injuries caused by improper operations, please read the instructions 
carefully before use. Be aware of your personal safety, safety of others and your 
surrounding environment. It is advised that beginners learn to fly the qudcopter under the 
guidance of professional.
  

1.2 Caution

  

 

Propellers work in high speed, which may cause dangerous. User will be responsible for 
any damages caused by improper operations.
Do not operate the quadcopter in crowds, buildings, airports or nearby high voltage 
cables.
   

1.3 Li-Po Battery Safety Notes

  

 

The quadcopter is powered by a Lithium-Polymer battery.
If you do not plan to use the products for a long time, store the battery approximately 50% 
charged to maintain battery performance and life.

● 

Before flight, check the batteries of quadcopter and controller are fully charged

● 

Before power on the remote controller, check the throttle stick is fully down

● Check the quadcopter is in good condition, broken parts will casue a risk of injur

y

● Always power on the remote controller first, then quadcopter. After using, always power 

off the quadcopter first, then remote controller. Improper procedure may

cause the quadcopter lose of control.

Connect the battery to the Hubsan USB charger, then connect the USB charger to USB 
devices, such as a computer or mobile power charger.

It takes around 30 minutes to fully charge the battery. The USB LED indicator is in red  when 
charging and light off when the battery is fully charged. Please unplug the charger and 
battery when the charging is completed.
Flight time is around 5 minutes.

®

ITEM NO: H001

THE HUBSAN NANO

Q4 SE

PLEASE READ THE MANUAL CAREFULLY BERORE USE.

14+

INTRODUCTION

Thank you for buying the HUBSAN products. It is designed as an easy-to-use, 

multi-functional RC model, capable of hovering, fast forward and acrobatic 

ight 

maneuvers. Please read the manual carefully and follow all the instructions. Be sure to 
keep the manual for future reference. 

1. Safety Notes

● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the local regulations.

Important

3. Safety Check Before Flying

4. Charge the Li-Po Battery

2. Items in the Box

Check all the items in the box before use.

1

Quadcopter

1PC

Equipped with

1pc of Li-Po Battery

4

USB Charger

1pc

For recharging the
 Li-Po Battery

5

Manual

1PC

2

Propellers

8PCS

Propeller A: 4pcs
Propeller B: 4pcs

3

Remote 
Controller

1pc

Equipped with 

2 X  AAA (Not Included)

S/N

Part Name

Photos

Quantity

Remarks

Quick Guide Instruction

The battery should only be charged with the HUBSAN charger to avoid overcharge.

6. Remote Controller

5 LED Indicator

4 Aileron Trim

3 Elevator Trim

(1) Throttle/ Aileron Stick

Mode 1

2

Elevator/ Rudder Stick

7.1 Power-On  

The quadcopter is designed with Power-On safety system, it ensures the motors will not 
start undelss safety signals detected.  

7.1.1 Turn on/off the remote controller by pushing power switch to left/right.

 

Make sure the Throttle stick is in the full down position, power on the remote controller, then 
quadcopter. Do not push any sticks or trims before pairing is succeeded, or the quadcopter 
will drift.

7. Start to Fly

6.1 Input Key Function

6.2  Quadcopter Calibration

Push the stick forward or backward and the quadcopter will fly 

forward or backward; Push the stick left or right and the 

quadcopter will rotate left or right.

Adjusts for forward and backward drift.

Adjusts for left and right drift.

Blink in red before binding;

Remain lighted in red after binding.

Turn on/off the remote controller.

S/N

Mode/ Control

Function

1

 

2

 

1

4

Mode 2
Throttle/ Rudder Stick

Mode 2

Elevator/ Aileron Stick

Mode 1

Throttle/ Aileron Stick

Mode 1
Elevator/ Rudder Stick

Elevator Trim

Aileron Trim

LED Indicator

Power Switch

Push the stick forward or backward and the quadcopter 

will fly forward or backward;Push the stick left or right 

and the quadcopter will fly left or right.
Push the stick forward or backward and the quadcopter will

ascend or decend; Push the stick left or right  and the quadcopter 

will fly left or right.

The throttle stick controls the ascent and 

descent . Push up the stick and the X4 

will ascend. Pull down the stick and the 

X4 will descend. Move the throttle 

stick above the center position to take 

off. (Move the stick gradually to prevent 

the X4 from ascending too quickly.)

The Rudder stick controls the rotate 

direction Push the stick to the left and the 

X4 will rotate counter-clockwise Push the 

stick to the right and the X4 will rotate 

clockwise. Pushing harder will cause the 

X4 to rotate faster in the corresponding 

directions.     

4 Power Switch

2 Elevator/Aileron Stick

5 LED Indicator

4 Throttle/ Rudder Trim

Elevator/ Aileron Trim

1 Throttle/ Rudder Stick

Mode 2

Mode 2

Mode 1

7.2 Basic Flight

The manual will use Mode 2 as an example to illustrate the transmitter’s operation.

Transmitter (Model 2)

Quadcopter

Operation

Up

Down

Right Rotation

Left Rotation

Forward

Backward

Right

Left

The Elevator stick moves the X4  forward 

and backward. 

Push the stick up the and the X4 will fly 

forward.

Pull the stick down and the  X4 will fly 

backward. 

The angle of stick movement corresponds 

to the angle of tilt and flight speed. 

The Aileron stick controls left and right 

flight. Push the stick to the left and the X4 

will fly to the left. Push the stick to the right 

and the X4 will fly to the right. The angle of 

stick movement corresponds to the angle 

of tilt and flight speed. 

5. Propellers

● Make sure that the A and B propellers are installed correctly. The quadcopter 

will not fly if propellers are improperly installed.

(1) Attach the propellers to the corresponding motors that
are marked A and B;

A=A

B=B

(2) Tighten the propellers to the motor shaft.

Quadcopter calibration is required when the quadcopter drifts during flight.

Land the quadcopter and place it on a horizontal surface for calibration.

Calibrating Procedures:

Mode 2

: Push the left stick to the bottom right, and move the right stick left to 

right quickly, the 4 LED indicators on quadcopter will blink alternately, calibration 
succeeded when the indicators stop blinking. 

Mode 1

: Push the left stick to the bottom right, put the right stick to the lowest 

and move left to right quickly, the 4 LED indicators on quadcopter will blink 
alternately, calibration succeeded when the indicators stop blinking. 

 

 

1.6 Always Be Aware of the Rotating Propellers

  

Be careful to keep your body away from the working propellers. Always keep the 

quadcopter fly in sight. If above mentioned happens, pwer off the quadcopter
and the remote controller immediately.
  

1.7 Avoid Flying Alone

  

Beginners should avoid flying alone when learning flight skills. 

Push the stick forward or backward and the quadcopter 

will ascend or decend; Push the stick left or right  and the 

quadcopter will rotate left or right.

● Do not mix old and new batteries                ● Do not mix different types of batteries
● Do not charge non-rechargeable battery.

1.4 Prevent Moisture 

 

The quadcopter contains many precision electrical componets.
Store the battery and the quadcopter in a dry area at room temperature. Exposure 
to water or moisture may cause malfunction resulting in loss of control.

1.5 Proper Operation

For safety, pnly use Hubsan spare parts for replacement.

Отзывы: