RED ROCKET-X INSTALLATION INSTRUCTIONS
COPYRIGHT © 2015 RED.COM, INC
955-0033, REV-E
|
35
8. Respond to the prompt to confirm which RED ROCKET-X cards to install:
‒
To upgrade one (1) RED ROCKET-X: Type
Y
and press
Enter
.
‒
To upgrade all RED ROCKET-X: Type
A
and press
Enter
.
‒
To cancel the upgrade: Press any other key and press
Enter
.
The upgrade process begins, and may take several minutes. A progress bar displays in the terminal window.
After the firmware is upgraded, you are prompted to fully shut down the computer and power back up
again.
9. Close the terminal/command window.
10. Shut down the computer. DO NOT simply restart the computer.
11. Wait a minimum of 60 seconds.
12. Start the computer.
13. To verify that the system recognizes the RED ROCKET-X, go to
“Validate RED ROCKET-X Installation” on
Install Firmware
Install Firmware
